In This Topic

General

The read-write register is a data variables that "holds" the value that is written to it by an OPC client, and the same value is then provided when the data variable is read by an OPC client (or an OPC client subscribes to it). Without further configuration, each data variable in OPC Wizard behaves essentially as a read-write register, because

The default access levels of the data variable allow for reading and writing of the current value.
When no Write request handling is implemented, the data written to the data variable by an OPC client ends up in the WriteAttributeData Property.
Because the WriteLoopback Property defaults to true, a copy of the data that was written is stored into the ReadAttributeData Property.
When no Read request handling is implemented, OPC clients receive the data from the ReadAttributeData Property.

However, even though the default behavior correspond to the read-write register, you usually still need to configure additional properties on the data variable, such as the data type. In most cases, you also want to define some reasonable initial data for the variable. These tasks can be done with the help of extensions methods for Data Variable Configuration.

Extension Methods for Configuration

The OPC Wizard provides extension methods that allow you to define read-write register data variables easily. This is described in the Data Variable Configuration article. Typically, you will use some overload of the ReadWrite or ReadWriteValue method to configure the data variable as the read-write register. The following example illustrates the use of the ReadWriteValue method.

.NET

// This example shows how to create a read-write data variable that behaves like a register.
// You can use any OPC UA client, including our Connectivity Explorer and OpcCmd utility, to connect to the server. 
//
// Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-ConnectivityStudio/Latest/examples.html .
// OPC client, server and subscriber examples in C# on GitHub: https://github.com/OPCLabs/Examples-ConnectivityStudio-CSharp .
// Missing some example? Ask us for it on our Online Forums, https://www.opclabs.com/forum/index ! You do not have to own
// a commercial license in order to use Online Forums, and we reply to every post.

using System;
using OpcLabs.EasyOpc.UA;
using OpcLabs.EasyOpc.UA.NodeSpace;

namespace UAServerDocExamples._UADataVariable
{
    partial class ReadWriteValue
    {
        public static void Main1()
        {
            // Instantiate the server object.
            // By default, the server will run on endpoint URL "opc.tcp://localhost:48040/".
            var server = new EasyUAServer();

            // Create a data variable that is a read-write register, defining its initial value.
            // The type of the data variable (Int32, in this case) is inferred from the initial value.
            server.Add(new UADataVariable("MyVariable").ReadWriteValue(42));

            // Start the server.
            Console.WriteLine("The server is starting...");
            server.Start();

            Console.WriteLine("The server is started.");
            Console.WriteLine();

            // Let the user decide when to stop.
            Console.WriteLine("Press Enter to stop the server...");
            Console.ReadLine();

            // Stop the server.
            Console.WriteLine("The server is stopping...");
            server.Stop();

            Console.WriteLine("The server is stopped.");
        }
    }
}

# This example shows how to create a read-write data variable that behaves like a register.
# You can use any OPC UA client, including our Connectivity Explorer and OpcCmd utility, to connect to the server. 
#
# Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .
# OPC client, server and subscriber examples in C# on GitHub: https://github.com/OPCLabs/Examples-ConnectivityStudio-CSharp .
# Missing some example? Ask us for it on our Online Forums, https://www.opclabs.com/forum/index ! You do not have to own
# a commercial license in order to use Online Forums, and we reply to every post.

#requires -Version 5.1
using namespace OpcLabs.EasyOpc.UA
using namespace OpcLabs.EasyOpc.UA.NodeSpace

# The path below assumes that the current directory is [ProductDir]/Examples-NET/PowerShell/Windows .
Add-Type -Path "../../../Components/Opclabs.QuickOpc/net472/OpcLabs.ServerOpcUAComponents.dll"

# Instantiate the server object.
# By default, the server will run on endpoint URL "opc.tcp://localhost:48040/".
$server = New-Object EasyUAServer

#  Create a data variable that is a read-write register, defining its initial value.
# The type of the data variable (Int32, in this case) is inferred from the initial value.
$server.Add([UADataVariableExtension]::ReadWriteValue((New-Object UADataVariable("MyVariable")), 42))

# Start the server.
Write-Host "The server is starting..."
$server.Start()

Write-Host "The server is started."
Write-Host

# Let the user decide when to stop.
Write-Host "Press Enter to stop the server..."
Read-Host

# Stop the server.
Write-Host "The server is stopping..."
$server.Stop()

Write-Host "The server is stopped."

' This example shows how to create a read-write data variable that behaves like a register.
' You can use any OPC UA client, including our Connectivity Explorer and OpcCmd utility, to connect to the server. 
'
' Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-ConnectivityStudio/Latest/examples.html .
' OPC client and subscriber examples in VB.NET on GitHub: https://github.com/OPCLabs/Examples-ConnectivityStudio-VBNET .
' Missing some example? Ask us for it on our Online Forums, https://www.opclabs.com/forum/index ! You do not have to own
' a commercial license in order to use Online Forums, and we reply to every post.

Imports System
Imports OpcLabs.EasyOpc.UA
Imports OpcLabs.EasyOpc.UA.NodeSpace

Namespace Global.UAServerDocExamples._UADataVariable
    Partial Friend Class ReadWriteValue
        Shared Sub Main1()
            ' Instantiate the server object.
            ' By default, the server will run on endpoint URL "opc.tcp://localhost:48040/".
            Dim server = New EasyUAServer()

            ' Create a data variable that is a read-write register, defining its initial value.
            ' The type of the data variable (Int32, in this case) is inferred from the initial value.
            server.Add(New UADataVariable("MyVariable").ReadWriteValue(42))

            ' Start the server.
            Console.WriteLine("The server is starting...")
            server.Start()

            Console.WriteLine("The server is started.")
            Console.WriteLine()

            ' Let the user decide when to stop.
            Console.WriteLine("Press Enter to stop the server...")
            Console.ReadLine()

            ' Stop the server.
            Console.WriteLine("The server is stopping...")
            server.Stop()

            Console.WriteLine("The server is stopped.")
        End Sub
    End Class
End Namespace

How do you choose between these extension methods?

If your code only supplies the initial variable value (and not the status code or timestamp), and the status code is always "Good" and you are fine with using the current time as the timestamp of the initial value, use a suitable overload of the ReadWriteValue extension method.
Otherwise (i.e. when you need to specify the status code or timestamp of the initial variable data), use a suitable overload of the ReadWrite extension method.

The following example illustrates the use of the ReadWrite method for defining a read-write register with specified initial attribute data (including status code and timestamp).

.NET

// This example shows how to create a read-write data variable that behaves like a register, specifying initial attribute
// data (including the status code and source timestamp).
// You can use any OPC UA client, including our Connectivity Explorer and OpcCmd utility, to connect to the server. 
//
// Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-ConnectivityStudio/Latest/examples.html .
// OPC client, server and subscriber examples in C# on GitHub: https://github.com/OPCLabs/Examples-ConnectivityStudio-CSharp .
// Missing some example? Ask us for it on our Online Forums, https://www.opclabs.com/forum/index ! You do not have to own
// a commercial license in order to use Online Forums, and we reply to every post.

using System;
using OpcLabs.EasyOpc.UA;
using OpcLabs.EasyOpc.UA.Generic;
using OpcLabs.EasyOpc.UA.NodeSpace;

namespace UAServerDocExamples._UADataVariable
{
    partial class ReadWrite
    {
        public static void Main1()
        {
            // Instantiate the server object.
            // By default, the server will run on endpoint URL "opc.tcp://localhost:48040/".
            var server = new EasyUAServer();

            // Create a data variable that is a read-write register, defining its initial attribute data.
            // The type of the data variable (Int32, in this case) is inferred from the initial data.
            server.Add(new UADataVariable("MyVariable").ReadWrite(new UAAttributeData<int>(
                value:42,
                UACodeBits.GoodLocalOverride,
                DateTime.UtcNow)));

            // Start the server.
            Console.WriteLine("The server is starting...");
            server.Start();

            Console.WriteLine("The server is started.");
            Console.WriteLine();

            // Let the user decide when to stop.
            Console.WriteLine("Press Enter to stop the server...");
            Console.ReadLine();

            // Stop the server.
            Console.WriteLine("The server is stopping...");
            server.Stop();

            Console.WriteLine("The server is stopped.");
        }
    }
}

# This example shows how to create a read-write data variable that behaves like a register, specifying initial attribute
# data (including the status code and source timestamp).
# You can use any OPC UA client, including our Connectivity Explorer and OpcCmd utility, to connect to the server. 
#
# Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .
# OPC client, server and subscriber examples in C# on GitHub: https://github.com/OPCLabs/Examples-ConnectivityStudio-CSharp .
# Missing some example? Ask us for it on our Online Forums, https://www.opclabs.com/forum/index ! You do not have to own
# a commercial license in order to use Online Forums, and we reply to every post.

#requires -Version 5.1
using namespace OpcLabs.EasyOpc.UA
using namespace OpcLabs.EasyOpc.UA.Generic
using namespace OpcLabs.EasyOpc.UA.NodeSpace

# The path below assumes that the current directory is [ProductDir]/Examples-NET/PowerShell/Windows .
Add-Type -Path "../../../Components/Opclabs.QuickOpc/net472/OpcLabs.ServerOpcUAComponents.dll"

# Instantiate the server object.
# By default, the server will run on endpoint URL "opc.tcp://localhost:48040/".
$server = New-Object EasyUAServer

# Create a data variable that is a read-write register, defining its initial attribute data.
# The type of the data variable (Int32, in this case) is inferred from the initial data.
$server.Add([UADataVariableExtension]::ReadWrite((New-Object UADataVariable("MyVariable")), 
    (New-Object UAAttributeData[int](42, [UACodeBits]::GoodLocalOverride, [DateTime]::UtcNow))))

# Start the server.
Write-Host "The server is starting..."
$server.Start()

Write-Host "The server is started."
Write-Host

# Let the user decide when to stop.
Write-Host "Press Enter to stop the server..."
Read-Host

# Stop the server.
Write-Host "The server is stopping..."
$server.Stop()

Write-Host "The server is stopped."

' This example shows how to create a read-write data variable that behaves like a register, specifying initial attribute
' data (including the status code and source timestamp).
' You can use any OPC UA client, including our Connectivity Explorer and OpcCmd utility, to connect to the server. 
'
' Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-ConnectivityStudio/Latest/examples.html .
' OPC client and subscriber examples in VB.NET on GitHub: https://github.com/OPCLabs/Examples-ConnectivityStudio-VBNET .
' Missing some example? Ask us for it on our Online Forums, https://www.opclabs.com/forum/index ! You do not have to own
' a commercial license in order to use Online Forums, and we reply to every post.

Imports System
Imports OpcLabs.EasyOpc.UA
Imports OpcLabs.EasyOpc.UA.Generic
Imports OpcLabs.EasyOpc.UA.NodeSpace

Namespace Global.UAServerDocExamples._UADataVariable
    Partial Friend Class ReadWrite
        Shared Sub Main1()
            ' Instantiate the server object.
            ' By default, the server will run on endpoint URL "opc.tcp://localhost:48040/".
            Dim server = New EasyUAServer()

            ' Create a data variable that is a read-write register, defining its initial attribute data.
            ' The type of the data variable (Int32, in this case) is inferred from the initial data.
            server.Add(New UADataVariable("MyVariable").ReadWrite(New UAAttributeData(Of Integer)(
                value:=42,
                UACodeBits.GoodLocalOverride,
                DateTime.UtcNow)))

            ' Start the server.
            Console.WriteLine("The server is starting...")
            server.Start()

            Console.WriteLine("The server is started.")
            Console.WriteLine()

            ' Let the user decide when to stop.
            Console.WriteLine("Press Enter to stop the server...")
            Console.ReadLine()

            ' Stop the server.
            Console.WriteLine("The server is stopping...")
            server.Stop()

            Console.WriteLine("The server is stopped.")
        End Sub
    End Class
End Namespace

If there is no valid initial value for the register, you can specify a "Bad" status code in its attribute data. This is illustrated in the following example.

.NET

// This example shows how to create a read-write data variable that behaves like a register, specifying initial "Bad"
// attribute data.
// You can use any OPC UA client, including our Connectivity Explorer and OpcCmd utility, to connect to the server. 
//
// Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-ConnectivityStudio/Latest/examples.html .
// OPC client, server and subscriber examples in C# on GitHub: https://github.com/OPCLabs/Examples-ConnectivityStudio-CSharp .
// Missing some example? Ask us for it on our Online Forums, https://www.opclabs.com/forum/index ! You do not have to own
// a commercial license in order to use Online Forums, and we reply to every post.

using System;
using OpcLabs.EasyOpc.UA;
using OpcLabs.EasyOpc.UA.Generic;
using OpcLabs.EasyOpc.UA.NodeSpace;

namespace UAServerDocExamples._UADataVariable
{
    partial class ReadWrite
    {
        public static void Bad()
        {
            // Instantiate the server object.
            // By default, the server will run on endpoint URL "opc.tcp://localhost:48040/".
            var server = new EasyUAServer();

            // Create a data variable that is a read-write register, defining its initial attribute data.
            // The type of the data variable (Int32, in this case) is inferred from the initial data.
            server.Add(new UADataVariable("MyVariable").ReadWrite(new UAAttributeData<int>(
                value:0,
                UACodeBits.BadNoCommunication,
                DateTime.UtcNow)));

            // Start the server.
            Console.WriteLine("The server is starting...");
            server.Start();

            Console.WriteLine("The server is started.");
            Console.WriteLine();

            // Let the user decide when to stop.
            Console.WriteLine("Press Enter to stop the server...");
            Console.ReadLine();

            // Stop the server.
            Console.WriteLine("The server is stopping...");
            server.Stop();

            Console.WriteLine("The server is stopped.");
        }
    }
}

# This example shows how to create a read-write data variable that behaves like a register, specifying initial "Bad"
# attribute data.
# You can use any OPC UA client, including our Connectivity Explorer and OpcCmd utility, to connect to the server. 
#
# Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .
# OPC client, server and subscriber examples in C# on GitHub: https://github.com/OPCLabs/Examples-ConnectivityStudio-CSharp .
# Missing some example? Ask us for it on our Online Forums, https://www.opclabs.com/forum/index ! You do not have to own
# a commercial license in order to use Online Forums, and we reply to every post.

#requires -Version 5.1
using namespace OpcLabs.EasyOpc.UA
using namespace OpcLabs.EasyOpc.UA.Generic
using namespace OpcLabs.EasyOpc.UA.NodeSpace

# The path below assumes that the current directory is [ProductDir]/Examples-NET/PowerShell/Windows .
Add-Type -Path "../../../Components/Opclabs.QuickOpc/net472/OpcLabs.ServerOpcUAComponents.dll"

# Instantiate the server object.
# By default, the server will run on endpoint URL "opc.tcp://localhost:48040/".
$server = New-Object EasyUAServer

# Create a data variable that is a read-write register, defining its initial attribute data.
# The type of the data variable (Int32, in this case) is inferred from the initial data.
$server.Add([UADataVariableExtension]::ReadWrite((New-Object UADataVariable("MyVariable")), 
    (New-Object UAAttributeData[int](0, [UACodeBits]::BadNoCommunication, [DateTime]::UtcNow))))

# Start the server.
Write-Host "The server is starting..."
$server.Start()

Write-Host "The server is started."
Write-Host

# Let the user decide when to stop.
Write-Host "Press Enter to stop the server..."
Read-Host

# Stop the server.
Write-Host "The server is stopping..."
$server.Stop()

Write-Host "The server is stopped."

' This example shows how to create a read-write data variable that behaves like a register, specifying initial "Bad"
' attribute data.
' You can use any OPC UA client, including our Connectivity Explorer and OpcCmd utility, to connect to the server. 
'
' Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-ConnectivityStudio/Latest/examples.html .
' OPC client and subscriber examples in VB.NET on GitHub: https://github.com/OPCLabs/Examples-ConnectivityStudio-VBNET .
' Missing some example? Ask us for it on our Online Forums, https://www.opclabs.com/forum/index ! You do not have to own
' a commercial license in order to use Online Forums, and we reply to every post.

Imports System
Imports OpcLabs.EasyOpc.UA
Imports OpcLabs.EasyOpc.UA.Generic
Imports OpcLabs.EasyOpc.UA.NodeSpace

Namespace Global.UAServerDocExamples._UADataVariable
    Partial Friend Class ReadWrite
        Shared Sub Bad()
            ' Instantiate the server object.
            ' By default, the server will run on endpoint URL "opc.tcp://localhost:48040/".
            Dim server = New EasyUAServer()

            ' Create a data variable that is a read-write register, defining its initial attribute data.
            ' The type of the data variable (Int32, in this case) is inferred from the initial data.
            server.Add(New UADataVariable("MyVariable").ReadWrite(New UAAttributeData(Of Integer)(
                value:=0,
                UACodeBits.BadNoCommunication,
                DateTime.UtcNow)))

            ' Start the server.
            Console.WriteLine("The server is starting...")
            server.Start()

            Console.WriteLine("The server is started.")
            Console.WriteLine()

            ' Let the user decide when to stop.
            Console.WriteLine("Press Enter to stop the server...")
            Console.ReadLine()

            ' Stop the server.
            Console.WriteLine("The server is stopping...")
            server.Stop()

            Console.WriteLine("The server is stopped.")
        End Sub
    End Class
End Namespace

The read-write registers defined by the ReadWrite method allow writing of the value, status code and timestamp. The read-write registers defined by the ReadWriteValue method only allow writing of the value. You can modify this behavior by configuring the data variable further, with the use of the Writable method. This is illustrated in the following example.

.NET

// This example shows how to create a read-write data variable that behaves like a register, and also allow writing to its
// source timestamp and status code.
// You can use any OPC UA client, including our Connectivity Explorer and OpcCmd utility, to connect to the server. 
//
// Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-ConnectivityStudio/Latest/examples.html .
// OPC client, server and subscriber examples in C# on GitHub: https://github.com/OPCLabs/Examples-ConnectivityStudio-CSharp .
// Missing some example? Ask us for it on our Online Forums, https://www.opclabs.com/forum/index ! You do not have to own
// a commercial license in order to use Online Forums, and we reply to every post.

using System;
using OpcLabs.EasyOpc.UA;
using OpcLabs.EasyOpc.UA.NodeSpace;

namespace UAServerDocExamples._UADataVariable
{
    partial class ReadWriteValue
    {
        public static void FullyWritable()
        {
            // Instantiate the server object.
            // By default, the server will run on endpoint URL "opc.tcp://localhost:48040/".
            var server = new EasyUAServer();

            // Create a data variable that is a read-write register, defining its initial value.
            // Also, allow writing to its source timestamp and status code.
            // The type of the data variable (Int32, in this case) is inferred from the initial value.
            server.Add(new UADataVariable("MyVariable").ReadWriteValue(42).Writable(true, true, true));

            // Start the server.
            Console.WriteLine("The server is starting...");
            server.Start();

            Console.WriteLine("The server is started.");
            Console.WriteLine();

            // Let the user decide when to stop.
            Console.WriteLine("Press Enter to stop the server...");
            Console.ReadLine();

            // Stop the server.
            Console.WriteLine("The server is stopping...");
            server.Stop();

            Console.WriteLine("The server is stopped.");
        }
    }
}

# This example shows how to create a read-write data variable that behaves like a register, and also allow writing to its
# source timestamp and status code.
# You can use any OPC UA client, including our Connectivity Explorer and OpcCmd utility, to connect to the server. 
#
# Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-OpcStudio/Latest/examples.html .
# OPC client, server and subscriber examples in C# on GitHub: https://github.com/OPCLabs/Examples-ConnectivityStudio-CSharp .
# Missing some example? Ask us for it on our Online Forums, https://www.opclabs.com/forum/index ! You do not have to own
# a commercial license in order to use Online Forums, and we reply to every post.

#requires -Version 5.1
using namespace OpcLabs.EasyOpc.UA
using namespace OpcLabs.EasyOpc.UA.NodeSpace

# The path below assumes that the current directory is [ProductDir]/Examples-NET/PowerShell/Windows .
Add-Type -Path "../../../Components/Opclabs.QuickOpc/net472/OpcLabs.ServerOpcUAComponents.dll"

# Instantiate the server object.
# By default, the server will run on endpoint URL "opc.tcp://localhost:48040/".
$server = New-Object EasyUAServer

# Create a data variable that is a read-write register, defining its initial value.
# Also, allow writing to its source timestamp and status code.
# The type of the data variable (Int32, in this case) is inferred from the initial value.
$server.Add([UADataVariableExtension]::Writable([UADataVariableExtension]::ReadWriteValue((New-Object UADataVariable("MyVariable")), 42), $true, $true, $true))

# Start the server.
Write-Host "The server is starting..."
$server.Start()

Write-Host "The server is started."
Write-Host

# Let the user decide when to stop.
Write-Host "Press Enter to stop the server..."
Read-Host

# Stop the server.
Write-Host "The server is stopping..."
$server.Stop()

Write-Host "The server is stopped."

' This example shows how to create a read-write data variable that behaves like a register, and also allow writing to its
' source timestamp and status code.
' You can use any OPC UA client, including our Connectivity Explorer and OpcCmd utility, to connect to the server. 
'
' Find all latest examples here: https://opclabs.doc-that.com/files/onlinedocs/OPCLabs-ConnectivityStudio/Latest/examples.html .
' OPC client and subscriber examples in VB.NET on GitHub: https://github.com/OPCLabs/Examples-ConnectivityStudio-VBNET .
' Missing some example? Ask us for it on our Online Forums, https://www.opclabs.com/forum/index ! You do not have to own
' a commercial license in order to use Online Forums, and we reply to every post.

Imports System
Imports OpcLabs.EasyOpc.UA
Imports OpcLabs.EasyOpc.UA.NodeSpace

Namespace Global.UAServerDocExamples._UADataVariable
    Partial Friend Class ReadWriteValue
        Shared Sub FullyWritable()
            ' Instantiate the server object.
            ' By default, the server will run on endpoint URL "opc.tcp://localhost:48040/".
            Dim server = New EasyUAServer()

            ' Create a data variable that is a read-write register, defining its initial value.
            ' Also, allow writing to its source timestamp and status code.
            ' The type of the data variable (Int32, in this case) is inferred from the initial value.
            server.Add(New UADataVariable("MyVariable").ReadWriteValue(42).Writable(True, True, True))

            ' Start the server.
            Console.WriteLine("The server is starting...")
            server.Start()

            Console.WriteLine("The server is started.")
            Console.WriteLine()

            ' Let the user decide when to stop.
            Console.WriteLine("Press Enter to stop the server...")
            Console.ReadLine()

            ' Stop the server.
            Console.WriteLine("The server is stopping...")
            server.Stop()

            Console.WriteLine("The server is stopped.")
        End Sub
    End Class
End Namespace

Data Type Considerations

See Variable Data Type Considerations.

General

Extension Methods for Configuration

.NET

.NET

.NET

.NET

Data Type Considerations

QuickOPC

Examples - Server OPC Unified Architecture

Installed Examples - Server Library